Millennial Net - Wireless Sensor Networking Technology MeshScape ®

Wireless Technology

Wireless Technology > Products > MeshScape GO KIT

MeshScape GO OEM Developers Kit

The first step to a fast, cost-effective development process is a fast, easy prototype. Millennial Net offers a MeshScape GO Developers Kit that delivers just that – enabling you to prototype your wireless network application in a matter of minutes.

MeshScape GO is pre-configured application ready wireless sensor networking protocol that is designed to provide highest performance communication with minimal overhead. Devices come already programmed on set hardware modules and are ready to be deployed right out of the box.

MeshScape GO product family utilizes standard 2.4Ghz IEEE 802.15.4 unlicensed radio band and an embedded Modbus communicating platform to minimize time to market for OEMs and to enable a broad range of applications.

	Price:
With Modbus RTU Gateway	$1,495.00*
With Modbus TCP Gateway	$1,995.00*

*Academic discounts are available for universities and educational research facilities. Please call Millennial Net +1-978-569-1925 or e-mail info@millennialnet.com before purchasing to receive your discount code.

Hardware Modules

1 MeshScape Go wireless gateway - choose between Modbus RTU or Modbus TCP
2 Mesh node wireless signal router devices
1 Mesh node OEM Analog/Digital Input/Output device
2 End node OEM modules w/ Serial UART and prototyping boards
1 End node temperature and humidity sensor device
All applicable accessories and power supplies

Additional modules can be added to your Developers Kit. Please contact Millennial Net via email or phone +1-978-569-1925 after placing the order if you wish to purchase extra devices.

MeshScape Network Monitor Software

An application for Windows-based PCs providing an easy-to-use user interface to monitor and manage the wireless sensor network. MeshScape Network Monitor will discover and display network information of active Mesh Nodes and End Nodes in range of the MeshScape Go wireless gateway.

MeshScape Network Monitor is designed for managing and monitoring wireless sensor network behavior, but it won’t display sensor value. Please use third party Modbus polling software, such as Modbus Poll to view the data.

	Parameter	Value	Notes
All Devices
Radio	Operating frequency range	2405 ~ 2475 MHz	ISM band
	Available Communication Channels	15	IEEE 802.15.4 channels 11 ~ 25
	Channel spacing	5 MHz
	Maximum RF transmit power	18 (63) dBm (mW)
	Receiver sensitivity	-95 dBm	At 10 -5 bit error rate
	RF data transmission rate	250 Kbits/sec
	Channel agility	Yes	Automatically realigns RF channel when network (MeshGate) switches to a new channel.
Environmental & Mechanical	Operating temperature range	-10 ~ +55 ° C	Applied only to radio box; -34 ~ +110 ° C (-29 ~ +230 ° F) operating and measurement range for thermistor probes
	Operating temperature range	-14 ~ +131 ° F
	Storage temperature range	-40 ~ +85 ° C
	Storage temperature range	-40 ~ +185 ° F
Regulatory Compliance	FCC, IC & CE for unlicensed operation
Modbus RTU Wireless Gateway
Power	External DC supply	4.5 ~ 30 VDC
Communication Interface	Physical connector	DB-9	RS-232 and RS-485
	Serial interface	RS-232 & RS-485	8 data bits, 1 stop bit, no parity bit
	Baud rate	2400, 4800, 9600, 19200, 38400, 57600, & 115200 bits/second
	Communication protocol	Modbus RTU	MeshGate II operates as proxy server of data from all devices in the mesh network; all wireless devices including MeshGate II are slave devices to the Modbus host.
Modbus TCP Wireless Gateway
Power	External DC supply	12 VDC
Communication Interface	Physical connector	RJ45
	Interface	Ethernet 10Base-T/100Base-TX	Supports TCP/IP networking stack with DHCP or static IP assignment
	Communication protocol	Modbus TCP/IP	Modbus TCP Gateway operates as proxy server of data from all devices in the mesh network; all wireless devices including itself are Modbus slave devices to Modbus masters. It supports communication with Modbus TCP devices through its Ethernet interface.
Analog/ Digital I/O Module
Power	External power supply	9 ~ 24 VDC
Power	Power supply voltage for external devices	3.0 ± 0.5% VDC	Max output current 50 mA
Digital Input / Output Channels	Number of channels	4 channel	Each of the four channels can be configured as digital input or output channel; DIO1 and DIO3 can be configured through jumper for opto-isolated switching output and return.
	Logic “1” input voltage	2.8 VDC	Minimum
	Logic “0” input voltage	0.5 VDC	Maximum
	Maximum output current	4 mA	Maximum
Opto-isolated Output Channels	Number of channel	1 channel	Remotely controlled based on schedule or real time command
	Maximum voltage	50 V, AC or DC
	Maximum current	1 A
Analog-to-digital Converter Channels	Number of channels	4 channel	Through jumpers, two channels can be configured to accept 0 ~ 3 VDC or 0 ~ 10 VDC analog signals, and the other two can be configured to accept 0 ~ 3 VDC or 4 ~ 20 mA analog signals
	Input impedance	197 (3V range) 4 (10V range)
	Acquisition time	20 m sec	Minimum
	Resolution	10 bits
OEM Module w/Serial UART
Power	External power supply	3.3 VDC
Digital Input / Output Channels	Number of channels	4 channel	The four channels can be configured as four general purpose digital I/O channels or as one UART serial interface port
	Logic “1” input voltage	2.8 VDC	Minimum
	Logic “0” input voltage	0.5 VDC	Maximum
	Maximum output current	4 mA	Maximum
UART Serial Interface	Number of ports	1	The four general purpose digital I/O channels can be configured to support UART serial interface
	Signal pins	4	The four signal pins include TX (to EN-6424), RX (from EN-6424), RTS, and CTS
	Baud rate	9,600 bits/sec
	Serial port specifications	8 data bits, 1 stop bit, 0 parity bit
	Maximum serial packet length	80 bytes
Analog-to-digital Converter Channels	Number of channels	4 channel	Through jumpers, two channels can be configured to accept 0 ~ 3 VDC or 0 ~ 10 VDC analog signals, and the other two can be configured to accept 0 ~ 3 VDC or 4 ~ 20 mA analog signals
	Input impedance	197
	Analog input voltage range	0 - 3.3 VDC
	Acquisition time	20 m sec	Minimum
	Resolution	10 bits
Temperature / Humidity Sensor Module
Power	External DC supply	4.5 ~ 30 VDC
	Internal batteries	4.5 VDC	Three AA size batteries
	Expected battery life	5 Years	Alkaline batteries, 5 minutes transmission interval; battery life reduces with shorter transmission intervals
Temperature Measurement	Measurement range	-40 ~ +55 ° C
	Measurement range	-40 ~ +131 ° F
	Repeatability	± 0.1 ( ± 0.18) ° C ( ° F)
	Accuracy	± 0.5 ( ± 0.9) ° C ( ° F)	In 20 ° C (68 ° F )~ 30 ° C (86 ° F) range
		± 1.4 ( ± 2.5) ° C ( ° F)	At -10 ° C (-14 ° F) and +55 ° C (131 ° F)
		± 2.0 ( ± 3.6) ° C ( ° F)	At -40 ° C (-40 ° F) and +90 ° C (194 ° F)
	Response time	5 ~ 30 Seconds
Humidity Measurement	Measurement range	0 ~ 100% RH
	Repeatability	± 0.1 % RH
	Accuracy	± 3 % RH	For 20 ~ 80% RH
	Accuracy	± 3 ~ ± 5 % RH	For 0 ~ 20% & 80 ~ 100% RH
	Response time	4 Seconds
Wireless Signal Repeater
Power	External DC supply	4.5 ~ 30 VDC
Power	Minimum supply voltage	3.1 VDC

To learn more about MeshScape GO OEM Developers Kit call us at +1-978-569-1925 or e-mail at info@millennialnet.com.

MillennialNet

MeshScape GO OEM Developers Kit

$1,495.00*

$1,995.00*